Меню

Sezam 900 hd настройка шары

Sezam community

Пошаговые настройки основных функций

Пошаговые настройки основных функций

by Nikoc49 » 30 Jul 2013, 10:51

Re: Пошаговые настройки основных функций

by Debian » 30 Jul 2013, 16:26

Re: Пошаговые настройки основных функций

by Nikoc49 » 31 Jul 2013, 05:03

Re: Пошаговые настройки основных функций

by Debian » 31 Jul 2013, 15:05

Вы скорее всего неправильно что-то делаете.
Для каждого спутника на дисеке или моторе должна быть свой номер LNB.

в этом меню надо спустится вниз и вам откроется следующее меню

Вам по Usals надо ввести свои координаты города для широты и долготы.

Для позиционера, в меню надо нажать красную кнопку (Настроить)

Re: Пошаговые настройки основных функций

by Nikoc49 » 02 Aug 2013, 15:48

Re: Пошаговые настройки основных функций

by Debian » 02 Aug 2013, 16:00

Re: Пошаговые настройки основных функций

by Nikoc49 » 02 Aug 2013, 16:19

Re: Пошаговые настройки основных функций

by dima_m » 02 Aug 2013, 17:20

Re: Пошаговые настройки основных функций

by Debian » 02 Aug 2013, 18:02

Re: Пошаговые настройки основных функций

by Nikoc49 » 03 Aug 2013, 07:14

Re: Пошаговые настройки основных функций

by новый » 03 Aug 2013, 10:41

Octagon SF4008 UHD 4K,MEMOBOX KII-UHD 4K,Sezam Marvel,Openbox s4pro+

(PKTeam)блюдо:0,6 ш@р@ VIP ALL.

Re: Пошаговые настройки основных функций

by Debian » 03 Aug 2013, 15:25

Re: Пошаговые настройки основных функций

by Nikoc49 » 08 Aug 2013, 15:56

Re: Пошаговые настройки основных функций

by gobzdik » 05 Jun 2014, 14:35

Re: Пошаговые настройки основных функций

by Debian » 05 Jun 2014, 14:47

Re: Пошаговые настройки основных функций

by gobzdik » 05 Jun 2014, 14:58

Re: Пошаговые настройки основных функций

by SergeyA » 10 Aug 2016, 00:17

я вам почти на это и намекал такое разрешение выдается когда не может модуль декодировать сигнал, такое же разрешение выдается и при работе через эмулятор у меня, когда по какой либо причине нет возможности декодирования, а вы все грешите на телек
далее с ваших же слов про количество каналов и их уровень сигнала, чтоб исключить модуль все просто, становитесь на любой канал желательно HD при этом вынув модуль и ждете 5-7 мин. за которое время у вас пропадал сигнал, смотреть на малевич не обязательно, и если произойдет тоже самое то модуль тут не причем а если с сигналом ничего не случится то соотвественно проблема в модуле, но как по мне вот это вот «уровень 51/качество 85-90» маловато будет, но утверждать не возьмусь, так как как и писал выше ради интереса с чужой тарелкой игрался только с 85 градусом и там у меня явно были уровни выше, про мой же постоянный просмотр 36 градуса сказать могу что у меня обе шкалы 99, за редким исключением некоторых частот, и в данный момент опять вот за окном облачность поперла, по сигнал файндеру AGG 99 SNR 83-85 (13.4-13.6 db) обычно тоже в районе 90-94% это один из транспондеров для примера который не 99

Re: Пошаговые настройки основных функций

by vladimir451963 » 10 Aug 2016, 21:26

на Skyway Droid уровень сигнала был 75, скорое всего эта особенность ресса. А это лог Sezam 5000 hd посмотрите может я что не так делаю. Заранее благодарен

Code: Select all BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ub:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
0x000000080000-0x000000280000 : «splash»
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 563
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/0
UBI: image sequence number: 225808210
UBI: background thread «ubi_bgt0d» started, PID 64
ALSA device list:
No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

INIT: Entering runlevel: 3

Configuring network interfaces. bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover.
Sending discover.
Sending discover.
No lease, forking to background
done.
Starting system message bus: NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
crond[462]: crond (busybox 1.24.1) started, log level 8

* starting UPnP client: djmount. done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
. done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

enigma2 is the main pvr application. adjust oom score!
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ub:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

—[ end trace 4eaa2a86a8e2da22 ]—
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io 0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for

Re: Пошаговые настройки основных функций

by SergeyA » 10 Aug 2016, 22:55

Re: Пошаговые настройки основных функций

by vladimir451963 » 11 Aug 2016, 00:34

Code: Select all BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Читайте также:  Настройка мкс павловский посад

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.499 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sda: sda1
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
0x000000080000-0x000000280000 : «splash»
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
sd 0:0:0:0: [sda] Attached SCSI disk
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 575
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/0
UBI: image sequence number: 225808210
ALSA device list:
No soundcards found.
UBI: background thread «ubi_bgt0d» started, PID 64
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

INIT: Entering runlevel: 3

Configuring network interfaces. bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover.
Sending discover.
Sending discover.
No lease, forking to background
done.
Starting system message bus: NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
* starting UPnP client: djmount. crond[462]: crond (busybox 1.24.1) started, log level 8

done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
. done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

enigma2 is the main pvr application. adjust oom score!
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
<545>[video_videomodepreferred_read] mode(0) not found.
Сейчас сделаю с модулем, но пробовал сбрасывать на заводские настройки потом заново выставлял спутник без модуля и проверял сигнал без модуля не сканируя такая же песня 5 минут держит, а потом опять падение сигнала на трех транспондерах.

Re: Пошаговые настройки основных функций

by SergeyA » 11 Aug 2016, 00:43

Re: Пошаговые настройки основных функций

by vladimir451963 » 11 Aug 2016, 00:53

Re: Пошаговые настройки основных функций

by vladimir451963 » 11 Aug 2016, 00:55

Re: Пошаговые настройки основных функций

by SergeyA » 11 Aug 2016, 01:02

да по тем логам которые вы предоставили, это без разницы, это логи просто загрузки реса. а вот для лога работы реса уже все должно быть подключено, потому как лог загрузки ни о чем не говорит, есть там конечно один моментик, но это лучше к Debian`у я не помню уже что пишет егами на 5000, а под рукой у меня его нет, да и с компортом у меня проблема, нет его у меня на компе давно, а переходник USB-COM куда то профукал. совсем нет никаких сервисов, хоть того же дилера трикала, обчно у них хоть что нибудь есть, если не велосипедисты конечно, всего то нужно посмотреть на ихнем антенном хозяйстве поведение.

ps ну если действительно так, в плане что хум работает при тех же условиях нормально то в сервис его однозначно. либо действительно что то с софтом наворотили, поставьте еще раз бекап Debian`а и ничего с ним не делайте, кроме настройки начальной как предложит мастер загрузки и сканирования спутника и посмотрите, ибо кое что мне лично не нравится в вашем логе загрузки, только действительно ничего к этому бекапу не добавляйте, и тогда уже принимайте решение в сервис его или как.

Re: Пошаговые настройки основных функций

by vladimir451963 » 11 Aug 2016, 01:04

Code: Select all BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (20 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 ytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND versi = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sda: sda1
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
0x000000080000-0x000000280000 : «splash»
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
sd 0:0:0:0: [sda] Attached SCSI disk
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 1403
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/1
UBI: image sequence number: 225808210
UBI: background thread «ubi_bgt0d» started, PID 64
ALSA device list:
No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
ALSA: Restoring mixer settings.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found.

INIT: Entering runlevel: 3

Configuring network interfaces. bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover.
Sending discover.
Sending discover.
No lease, forking to background
done.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Starting system message bus: Unknown username «avahi» in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
crond[463]: crond (busybox 1.24.1) started, log level 8

Читайте также:  Настройка сцены в автокад

* starting UPnP client: djmount. done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna. done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Timeout reached while wating for return value
Could not receive return value from daemon process.
. fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application. adjust oom score!
[MAIN] executing main

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
<572>
CI Negotiated buffer size is 255 bytes
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[video_videomodepreferred_read] mode(0) not found.
<565>[ci_read] buffer empty
<565>[ci_read] buffer empty

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
<572>
CI Negotiated buffer size is 255 bytes
<620>[XportConnectionThread] (1) RCV res = 5 (== 5) (xport_rcv_timeout = 7000)
<620>[XportConnectionThread] transport rcv data timedout.

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
<572>
CI Negotiated buffer size is 255 bytes
Да и почему падение сигнала только на трех транспондерах, если была проблема с тюнером то он бы вообще не ловил ни один тран. И на разных прошивках падение сигнала на разных транспондерах.

Re: Пошаговые настройки основных функций

by SergeyA » 11 Aug 2016, 01:20

сейчас по моему Debian нам что то сделает прячте под спойлер логи, да и этого лога достаточно одного, потому как это лог загрузки реса но ни как не обображает его работу.
что касается «Да и почему падение сигнала только на трех транспондерах, если была проблема с тюнером то он бы вообще не ловил ни один тран. И на разных прошивках падение сигнала на разных транспондерах.» я вам изначально твержу что по мне это проблема либо модуля либо с антенным хозяйством что то не так. по модулям этим были проблемы и именно почти такая же плавающая фигня, когда не понятно в чем проблема, писалось на других форумах не однократно, в том числе на телеспутнике. я бы вот лично изза некоторых проблем, вернее кое каких моментиков, в настоящее время вообще не стал брать эти ресы для оффпросмотра, Debian знает по моим постам мое некоторое недовольство, во всем остальном снова повторюсь нет проблем с этими ресами. и в какой то мере для просто просмотра телевидения мне больше нравиться 5000 чем марвел. всего много, а гимора больше

ps. и еще одно, коль уж нет другого антенного хозяйства, и чтоб исключить влияние модуля, на прямую писать не буду, посмотрите на подписи модераторов форума, у них там есть сервисы некоторые, например заргакум, зайдите возьмите на тест своей спутник и проверьте как будет работать, пару часов по любому хватит, настройки эмулятора возьмете там же, вот и вся в этом случае будет проверка

Re: Пошаговые настройки основных функций

by Debian » 11 Aug 2016, 17:21

Re: Пошаговые настройки основных функций

by vladimir451963 » 13 Aug 2016, 21:50

= PuTTY log 2016.08.13 16:43:43 =

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Buit 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
0x000000080000-0x000000280000 : «splash»
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 1886
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number: 225808210
UBI: background thread «ubi_bgt0d» started, PID 62
ALSA device list:
No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

INIT: Entering runlevel: 3

Configuring network interfaces. bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover.
Sending discover.
Sending discover.
No lease, forking to background
done.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Starting system message bus: Unknown username «avahi» in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
crond[406]: crond (busybox 1.24.1) started, log level 8

* starting UPnP client: djmount. done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna. done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Timeout reached while wating for return value
Could not receive return value from daemon process.
. fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application. adjust oom score!
[MAIN] executing main
<509>[video_videomodepreferred_read] mode(0) not found.
<509>[video_videomodepreferred_read] mode(0) not found.
<509>[video_videomodepreferred_read] mode(0) not found.
<509>[video_videomodepreferred_read] mode(0) not found.
<509>[video_videomodepreferred_read] mode(0) not found.
<509>[video_videomodepreferred_read] mode(0) not found.
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 3f6
TuxTxt running thread. (3f6)
TuxTxt stopped service 3f6
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
bcmemac: eth0 NIC Link is Up 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<509>[video_policy2_write] policy(scale) not found
<509>[video_policy2_write] policy(scale) not found
<509>[video_aspect_write] aspect(16:10) not found.
<509>[video_aspect_write] aspect(auto) not found.
cleaning up
TuxTxt cache cleared
net.ipv4.conf.default.rp_filter = 1
netpv4.conf.all.rp_fr = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
enigma2 is the main pvr application. adjust oom score!
<2071>[video_videomodepreferred_read] mode(0) not found.
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
<2071>[video_videomodepreferred_read] mode(0) not found.
<2071>[video_videomodepreferred_read] mode(0) not found.
<2071>[video_videomodepreferred_read] mode(0) not found.
<2071>[video_videomodepreferred_read] mode(0) not found.
<2071>[video_videomodepreferred_read] mode(0) not found.
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
<2071>[video_aspect_write] aspect(auto) not found.
<2071>[video_policy2_write] policy(scale) not found

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Читайте также:  Dir 100 настройка как свитч

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/826я

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
ce Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.498 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
0x000000080000-0x000000280000 : «splash»
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 1930
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number: 225808210
ALSA device list:
UBI: backgrnd thread «ubi_bgt0d» started, PID 62
No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

INIT: Entering runlevel: 3

Configuring network interfaces. udhcpc (v1.24.1) started
Sending discover.
Sending select for 192.168.1.33.
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
NET: Registered protocol family 10
Starting system message bus: Unknown username «avahi» in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
crond[402]: crond (busybox 1.24.1) started, log level 8

* starting UPnP client: djmount. done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna. done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
/etc/network/if-up.d/ntpdate-sync: line 45: hwclock: command not found
Timeout reached while wating for return value
Could not receive return value from daemon process.
. fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application. adjust oom score!
[MAIN] executing main
<508>[video_videomodepreferred_read] mode(0) not found.
<508>[video_aspect_write] aspect(auto) not found.
<508>[video_policy2_write] policy(scale) not found
<508>[video_videomodepreferred_read] mode(0) not found.
<508>[video_videomodepreferred_read] mode(0) not found.
<508>[video_videomodepreferred_read] mode(0) not found.
<508>[video_videomodepreferred_read] mode(0) not found.
<508>[video_videomodepreferred_read] mode(0) not found.
Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces
Reconfiguring network interfaces.
udhcpc (v1.24.1) started
Sending discover.
Sending select for 192.168.1.33.
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
grep: /etc/enigma2/settings: No such file or directory
grep: /etc/enigma2/settings: No such file or directory
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
enigma2 is the main pvr application. adjust oom score!
no profile data available
<618>[video_videomodepreferred_read] mode(0) not found.
<618>[video_videomodepreferred_read] mode(0) not found.
<618>[video_videomodepreferred_read] mode(0) not found.

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq: 396MHz
CPU speed: 405MHz
Memory Config: 64-bit UMA
Device Tech: 1Gb
Total memory: 512MB
Boot Device: NOR
Total flash: 4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

[FLASH-TOOL] Searching update files.

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files.

Executing STARTUP.
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader. found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
Kernel command line: bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80×25
Calibrating delay loop. 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1.
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
————[ cut here ]————
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[ ] dump_stack+0x8/0x34
[ ] warn_slowpath_common+0x78/0xa4
[ ] warn_slowpath_null+0x18/0x24
[ ] start_secondary+0x444/0x48c
[ ] brcmstb_tp1_reentry+0x0/0x34

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
—>brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on «brcmnand.0»:
0x000000000000-0x00001ff00000 : «complete»
0x000000000000-0x000000600000 : «kernel»
0x000000600000-0x00001ff00000 : «rootfs»
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on «physmap-flash.0»:
0x000000000000-0x000000080000 : «cfe»
0x000000080000-0x000000280000 : «splash»
0x000000280000-0x000000300000 : «macadr»
0x000000300000-0x000000380000 : «nvram»
0x000000380000-0x0000003c0000 : «bootconfig»
0x0000003c0000-0x000000400000 : «facconfig»
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number: 1985
UBI: attached mtd2 to ubi0
UBI: MTD device name: «rootfs»
UBI: MTD device size: 505 MiB
UBI: number of good PEBs: 4040
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number: 225808210
ALSA device list:
UBI: background thread «ubi_bgt0d» started, PID 62
No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name «rootfs»
UBIFS: file system size: 500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

INIT: Entering runlevel: 3

Configuring network interfaces. udhcpc (v1.24.1) started
Sending discover.
Sending select for 192.168.1.33.
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
NET: Registered protocol family 10
Starting system message bus: Unknown username «avahi» in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon. done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems.
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond. done.
crond[402]: crond (busybox 1.24.1) started, log level 8

* starting UPnP client: djmount. done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna. done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
* Starting uShare UPnP A/V & DLNA Media Server: ushare
. done.
* starting FTP Server: vsftpd. done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
/etc/network/if-up.d/ntpdate-sync: line 45: hwclock: command not found
Timeout reached while wating for return value
Could not receive return value from daemon process.
. fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS.
[EGAMI] Sezam

; X CryptSystem Orginal by Keymaker

; ( I=Irdeto, S=Seca, N=Nagra, V=Viaccess, X=Conax )

Источник